Thermaltake blacx duet not recognized windows 7
- #Thermaltake blacx duet not recognized windows 7 drivers
- #Thermaltake blacx duet not recognized windows 7 manual
- #Thermaltake blacx duet not recognized windows 7 windows 7
Open the Start Menu and type Disk Management in the search box (for XP type drvmgmt.msc) and press enter.
#Thermaltake blacx duet not recognized windows 7 windows 7
After a minute or so, you’ll see an “installing new hardware” message and if the drive is recognized and mounted successfully you’ll see this: The Windows 7 message alerting you that the dock is ready for use. Once your drive is installed, power on the dock with the switch on the back. Be sure to line up the connectors inside the slot with the connectors on the drive and push the drive into the slot firmly until it seats on the connector. The Plugable USB3-SATA-U3 Hard Drive Docking Station is compatible with both 2.5″ laptop sized drives and 3.5″ desktop sized drives. To verify that the port is working, test with a simple device like a wired USB mouse.įirst power off the dock and insert the drive. Connect the USB 2.0 cable to the docking station and to a known good USB port on your computer. Once we have everything working on USB 2.0 we’ll move up to USB 3.0 – if it’s available on the host computer. The USB 3.0 cable has blue plastic inside the connectors. Your Docking Station comes with both USB 2.0 cable and USB 3.0 cables. If your dock is not indicating power with the green light, stop here, contact us at We’ll be happy to help. With no drive inserted you should see the green light illuminated like this: Make sure the green light is on before connecting to the computer. The first step is to connect your SATA Dock to AC power and to an active USB port. This troubleshooting guide will help you through the process of getting your USB3-SATA-U3 up and running at USB 3.0 speed. If you do have problems, there are many different issues that can cause your SATA Dock to misbehave – among them are drive format, disk failures, and permissions issues.
#Thermaltake blacx duet not recognized windows 7 drivers
Becuase the drivers are included in all major operating systems it’s as simple as plug and play so there’s nothing to install. It’s compatible with both USB 2.0 and 3.0 and either 2.5″ or 3.5″ drives. The Plugable USB 3.0 SATA Hard Drive Docking Station is a convenient way to connect SATA hard drives to any computer with a USB port. Now that we are familiar with the layout, let’s have a look at usage and performance.Originally authored by: Jerome Myers, August 20, 2012
You can place any combination of 3.5 and 2.5 drives in the BlacX Duet which pop out easily with a firm push of the eject buttons residing along the side on the top of the docking station.ĭual LEDs shine with a bright blue when in operation and flash when there is read/write activity. Note that if both the USB & eSATA ports are in use, the eSATA takes precendence over the USB connection which is smart since it is the fastest of the two connections.
Also present is the product label with barcode, keeping the more visible portion of the dock clean with minimal branding.Īround back, the eSATA, USB and power inputs sit adjacent to each other and centered on the dock. The bottom features four rubber feet for prevention of slip and damage to the desk or other surface it is placed upon. From the top, the two bays are visible with the L-shaped flaps that fold down when a 3.5 drive is inserted and the gap outlines where the 2.5 drives fit in. The overall design of the Thermaltake BlacX Duet is simple, yet effective. There is also information for formatting and partitioning drives as well as some steps for using device manager in Windows should you have difficulty with the drive appearing in Explorer.
#Thermaltake blacx duet not recognized windows 7 manual
The manual provides the usual features diagram, installation instructions and a list of the specifications and features. In the box youll find a power adapter, the manual, a USB 2.0 cable, and an eSATA cable.